Capacity (KLD/MLD) | 1 KLD TO 5 MLD |
Application Industry | mining industries |
Inlet Flow Rate(m3/day or m3/hr) | 5000 m3/day |
Treatment Technique | Fluidized Aerated Reactor |
Water Source | Industrial Effluent |
Control Module | Available |
Automation Grade | Automatic |
Deliver Type | Outside India |
Warranty | 1 Year |
I Deal In | New Only |
Installation Type | Containerized Plug & Play |
Country of Origin | Made in India |
Zero Liquid Discharge (ZLD) is a treatment process designed to remove all the liquid waste from a system. The focus of ZLD is to reduce wastewater economically and produce clean water that is suitable for reuse (e.g. irrigation), thereby saving money and being beneficial to the environment. ZLD systems employ advanced wastewater/desalination treatment technologies to purify and recycle virtually all of the wastewater produced.
Zero liquid discharge plant are also termed in this way Zero Liquid Discharge System, Zero Liquid Discharge Plant, zld plant, ZLD evaporator
Installation type are complete civil work, perbrabicated, containerized plug and play
Capacity in KLD are also available in 5kld, 10kld, 20kld, 50kld, 100kld, 150kld, 200kld, 500kld, 1000kld, 2mld, 3mld, 4mld, 5mld.
Feeb flow rate are 100 m3/day, 500 m3/day, 1000 m3/day, 2000 m3/day, 5000 m3/day, 10000 m3/day.
The specific technologies that will make up a facility’s ZLD treatment system will vary greatly depending on (1.) the volume of dissolved material present in the waste, (2.) the system’s required flow rate, and (3.) what specific contaminants are present, but will generally consist of a three-step process with the following “blocks” of treatment:
Pretreatment and conditioning; removes simple things from the wastewater stream that can be filtered or precipitated out, conditioning the water and reducing the suspended solids and materials that would otherwise scale and/or foul following treatment steps.
Phase-one concentration. Concentrating is usually done with membranes like reverse osmosis (RO), brine concentrators, or electrodialysis. These technologies take this stream and concentrate it down to a high salinity and pull out up to 60–80% of the water.
Evaporation/crystallization. After the concentration step is complete, the next step is generating a solid, which is done through thermal processes or evaporation, where you evaporate all the water off, collect it, and reuse it. The leftover waste then goes from an evaporator to a crystallizer, which continues to boil off all the water until all the impurities in the water crystallize and are filtered out as a solid.
Water Source | Industrial Effluent |
Brand/Make | WTE |
Installation Service | Yes |
Function | To treat the industrial Waste water |
Body Material | SS/MS |
Applicable Industry | sugar,Oil,chemical,power,steel |
Country of Origin | Made in India |
Capacity (KLD) | 25 KLD |
Application Industry | Pharmaceutical & Chemicals |
Inlet Flow Rate(m3/day) | 50 m3/day |
Treatment Technique | ZLD |
Water Source | Industrial Effluent |
Control Module | Available |
Automation Grade | Automatic |
Deliver Type | Outside India |
Warranty | 1 Year |
Treatment Stages | Secondary Treatment |
Zero Liquid Discharge (ZLD) is a treatment process designed to remove all the liquid waste from a system. The focus of ZLD is to reduce wastewater economically and produce clean water that is suitable for reuse (e.g. irrigation), thereby saving money and being beneficial to the environment. ZLD systems employ advanced wastewater/desalination treatment technologies to purify and recycle virtually all of the wastewater produced.
Zero liquid discharge plant are also termed in this way Zero Liquid Discharge System, Zero Liquid Discharge Plant, zld plant, ZLD evaporator
The specific technologies that will make up a facility’s ZLD treatment system will vary greatly depending on the volume of dissolved material present in the waste, the system’s required flow rate, and what specific contaminants are present, but will generally consist of a three-step process with the following “blocks” of treatment:
Pretreatment and conditioning; removes simple things from the wastewater stream that can be filtered or precipitated out, conditioning the water and reducing the suspended solids and materials that would otherwise scale and/or foul following treatment steps.
Phase-one concentration. Concentrating is usually done with membranes like reverse osmosis (RO), brine concentrators, or electrodialysis. These technologies take this stream and concentrate it down to a high salinity and pull out up to 60–80% of the water.
Evaporation/crystallization. After the concentration step is complete, the next step is generating a solid, which is done through thermal processes or evaporation, where you evaporate all the water off, collect it, and reuse it. The leftover waste then goes from an evaporator to a crystallizer, which continues to boil off all the water until all the impurities in the water crystallize and are filtered out as a solid. The common name of the ETP plant are also called as effluent treatment system, etp plant, effluent treatment system , effluent treatment plant , etp, etp water plant, effluent treatment system, effluent treatment, etp suppliers, best effluent treatment plant, industrial etp, Effluent wastewater treatment plant, etp cost, effluent treatment system plant,industrial Effluent treatment plant, textile effluent treatment system, etp plant price, effluent treatment plant manufacturer, manufacturing of etp, suppliers of etp, biomedical liquid waste treatment system, industrial stp, Industrial water stp, domestic Industrial sewage
Capacity (KLD/MLD) | 5 KLD - 3 MLD |
Application Industry | Chemical/Petroleum Industry |
Water Source Type | Industrial Effluent |
Inlet Flow Rate(m3/day or m3/hr) | 3000 m3/day |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Control Module | Available |
Automation Grade | Automatic |
Warranty | 1 Year |
Installation Type | Complete Civil work with Installation |
Country of Origin | Made in India |
Effluent Treatment Plants or (ETPs) are used by leading companies in the pharmaceutical and chemical industry to purify water and remove any toxic and non toxic materials or chemicals from it. These plants are used by all companies for environment protection.
An ETP is a plant where the treatment of industrial effluents and waste waters is done. The ETP plants are used widely in the industrial sector, for example, pharmaceutical industry, to remove the effluents from the bulk drugs.
During the manufacturing process of drugs, varied effluents and contaminants are produced. The effluent treatment plants are used in the removal of high amounts of organics, debris, dirt, grit, pollution, toxic, non toxic materials, polymers etc. from drugs and other medicated stuff. The ETP plants use evaporation and drying methods, and other auxiliary techniques such as centrifuging, filtration, incineration for chemical processing and effluent treatment.
The treatment of effluents is essential to prevent pollution of the receiving water. The effluent water treatment plants are installed to reduce the possibility of pollution; biodegradable organics if left unsolved, the levels of contamination in the process of purification could damage bacterial treatment beds and lead to pollution of controlled waters. The ETPs can be established in the industrial sectors like Pharmaceuticals, Chemicals and Leather industry and tanneries hospitals. etp plant, effluent treatment system , effluent treatment plant , etp, etp water plant, effluent treatment system, effluent treatment, etp suppliers, best effluent treatment plant, industrial etp, Effluent wastewater treatment plant, etp cost, effluent treatment system plant, industrial Effluent treatment plant, textile effluent treatment system, etp plant price, effluent treatment plant manufacturer, manufacturing of etp, suppliers of etp biomedical liquid waste treatment system. The common name of the ETP plant are also called as effluent treatment system, etp plant, effluent treatment system , effluent treatment plant , etp, etp water plant, effluent treatment system, effluent treatment, etp suppliers, best effluent treatment plant, industrial etp, Effluent wastewater treatment plant, etp cost, effluent treatment system plant,industrial Effluent treatment plant, textile effluent treatment system, etp plant price, effluent treatment plant manufacturer, manufacturing of etp, suppliers of etp, biomedical liquid waste treatment system, industrial stp, Industrial water stp, domestic Industrial sewage
Installation Type | Prefabricated |
Capacity (KLD) | 50 KLD |
Application Industry | Pharmaceutical & Chemicals |
Air Blower Count | 2 Blowers |
Inlet Flow Rate(m3/day) | 50 m3/day |
Air Blower Power | 0.4 KW |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Water Source | Industrial Effluent |
Control Module | Available |
Automation Grade | Semi-Automatic |
Deliver Type | PAN India |
Treatment Stages | Primary Treatment, Secondary Treatment |
Warranty | 1 Year |
Country of Origin | Made in India |
Zero Liquid Discharge (ZLD) is a treatment process designed to remove all the liquid waste from a system. The focus of ZLD is to reduce wastewater economically and produce clean water that is suitable for reuse (e.g. irrigation), thereby saving money and being beneficial to the environment. ZLD systems employ advanced wastewater/desalination treatment technologies to purify and recycle virtually all of the wastewater produced.
Zero liquid discharge plant are also termed in this way Zero Liquid Discharge System, Zero Liquid Discharge Plant, zld plant, ZLD evaporator
The specific technologies that will make up a facility’s ZLD treatment system will vary greatly depending on the volume of dissolved material present in the waste, the system’s required flow rate, and what specific contaminants are present, but will generally consist of a three-step process with the following “blocks” of treatment:
Pretreatment and conditioning; removes simple things from the wastewater stream that can be filtered or precipitated out, conditioning the water and reducing the suspended solids and materials that would otherwise scale and/or foul following treatment steps.
Phase-one concentration. Concentrating is usually done with membranes like reverse osmosis (RO), brine concentrators, or electrodialysis. These technologies take this stream and concentrate it down to a high salinity and pull out up to 60–80% of the water.
Evaporation/crystallization. After the concentration step is complete, the next step is generating a solid, which is done through thermal processes or evaporation, where you evaporate all the water off, collect it, and reuse it. The leftover waste then goes from an evaporator to a crystallizer, which continues to boil off all the water until all the impurities in the water crystallize and are filtered out as a solid. The common name of the ETP plant are also called as effluent treatment system, etp plant, effluent treatment system , effluent treatment plant , etp, etp water plant, effluent treatment system, effluent treatment, etp suppliers, best effluent treatment plant, industrial etp, Effluent wastewater treatment plant, etp cost, effluent treatment system plant,industrial Effluent treatment plant, textile effluent treatment system, etp plant price, effluent treatment plant manufacturer, manufacturing of etp, suppliers of etp, biomedical liquid waste treatment system, industrial stp, Industrial water stp, domestic Industrial sewage
Minimum Order Quantity | 1 Piece |
Capacity (KLD) | 100 KLD |
Application Industry | Pharmaceutical & Chemicals |
Inlet Flow Rate(m3/day) | 100 m3/day |
Air Blower Count | 2 Blowers |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Water Source | Industrial Effluent |
Treatment Stages | Secondary Treatment, Preliminary Treatment, Primary Treatment |
Plant Type | Waste water treatment |
Installation Type | Complete Civil work with Installation |
Automation Grade | Automatic |
Country of Origin | Made in India |
Sterilizing Rate | 99.99% |
The common name of the ETP plant are also called as effluent treatment system, etp plant, effluent treatment system , effluent treatment plant , etp, etp water plant, effluent treatment system, effluent treatment, etp suppliers, best effluent treatment plant, industrial etp, Effluent wastewater treatment plant, etp cost, effluent treatment system plant,industrial Effluent treatment plant, textile effluent treatment system, etp plant price, effluent treatment plant manufacturer, manufacturing of etp, suppliers of etp, biomedical liquid waste treatment system, industrial stp, Industrial water stp, domestic Industrial sewage
Water Source Type | Borewell Water |
Treatment Technique | Mixed Bed Bio Reactor |
Usage/Application | Industrial |
Brand | Wte Infra |
Industry | Chemical |
Automation Grade | Fully Automatic |
Installation Type | Complete Civil work with Installation |